Implementation
Qmac "Hydro Twin" Hydraulic.
The Hydro Twin is a trench cutter with the unique feature of being able to be adjusted to a very wide range of motion, both to the left and to the right. Because of the large angle—which cannot be achieved with a PTO—a hydraulic drive connected to the tractor’s hydraulic system was chosen. The pump is protected, and the oil automatically circulates when the machine is stopped, eliminating the need for an additional drain line. This “Hydro Twin” trencher has been extensively tested in the field, and references are available upon request.
- Weight 550 kg
- Galvanized
- Working depth 10–35 cm
- Left-side discharge
- Number of cutting blades: 5
- Number of discharge blades: 10
- Cleaning and creating ditches, particularly in arable farming.
- Ensuring proper drainage by avoiding driving in the track.
- Swing width 125 cm left/right in front of the 250 cm track
- Hydraulic control
- Hydraulic drive
- Required flow rate: 75 L/min at approx. 375 rpm
The Hydro Twin is a trench cutter with the unique feature of being able to be adjusted to a very wide range of motion, both to the left and to the right. Because of the large angle—which cannot be achieved with a PTO—a hydraulic drive connected to the tractor’s hydraulic system was chosen. The pump is protected, and the oil automatically circulates when the machine is stopped, eliminating the need for an additional drain line. This “Hydro Twin” trencher has been extensively tested in the field, and references are available upon request.
- Weight 550 kg
- Galvanized
- Working depth 10–35 cm
- Left-side discharge
- Number of cutting blades: 5
- Number of discharge blades: 10
- Cleaning and creating ditches, particularly in arable farming.
- Ensuring proper drainage by avoiding driving in the track.
- Swing width 125 cm left/right in front of the 250 cm track
- Hydraulic control
- Hydraulic drive
- Required flow rate: 75 L/min at approx. 375 rpm
Specifications
| Brand | QMAC |
|---|---|
| Category | Trench Cutter |
| Unit counter (km/miles/hours/other) | Other |
| Overall Rating (Fitness) | new |
| Milling cutter type | Slot Cutter |
| Working width (cm) | 35.00 |
| Number of rows | 1 |
| Working depth (cm) | 35 |
